From Hardware Manager Click on the pad lock to allow editing of the Hardware Module. "¢  Highlight the Controller from the column on the left, right mouse-click and select Edit, Add New Sub-Controller. o  Driver Controller Address - This field will automatically be populated with the address of the Driver the Controller is installed beneath. o  Sub-Controller Type - Select 8, 16 or 32 Channel Camera System. o  Sub-Controller Address - The Sub-Controller address is a virtual address assigned by the Access Control Security Application and should remain at 0.  The next available address will be assigned to the Sub-Controller. "¢  Click the green check mark to save changes or click the blue x to exit without saving.